-> Products » RAID-Systems » Infortrend RAID-Systems » EonStor » ES A24U-G2421
The ES A24U-G2421-1M5 boasts an IBM PowerPC FX 600MHz CPU and supports up to 24 3.5 LFF SATA II HDDs.
Built around Infortrend's proprietary ASIC266 dual PCI-X architecture, the subsystem features a single RAID controller, two SCSI host channels, DDR266 cache memory, two dual-fan cooling modules, three power supplies, and an optional battery backup unit.
With reliable SCSI and clustering support, the EonStor A24U is a great, cost-effective storage solution to incorporate into disk farms, ATM service centers, and imaging stations that require RAID protection at a lower cost per gigabyte.
To guarantee easy service and maintenance, this new array comes with modular, field-replaceable units that can be conveniently accessed from the front or rear of the enclosure. A hard disk drive, power supply, battery module, RAID controller or cooling fan can be replaced within seconds in the event of component failure.
The A24U-G2421-1M5 chassis has been enhanced to reduce vibration resonance and its dual-speed cooling fans provide quiet operation and lower power consumption under normal operating conditions. With its auto switch cache and shutdown policies plus support for an optional battery backup unit and uninterruptible power supply, the ES A24U ensures data protection when critical conditions occur.
| Model | Infortrend EonStor A24U-G2421-1M5 |
| Host-Interface | 2x Ultra320 SCSI (2x VHDCI) |
| Hardware | |
| Controller | single |
| RAID Engine | ASIC266 |
| Battery Backup | optional |
| Cache Memory | 512MB~2048MB DDR RAM (512 MB installed) |
| Disk Interface | SATA II (3Gbit/s) |
| Harddisk Drives | up to 24x 3.5 LFF SATA II, hot swappable |
| Rails | optional |
| Hot Swap Fan Modules | 2 |
| Power Supply | 3x 405W, redundant, hot-swappable |
| AC Input Voltage | 100/240 V (± 10%), 47~63Hz |
| Performance | |
| Data Transfer Rate | up to 320MB/s per Host |
| Management | |
| Front Panel LCD and Buttons | easy access for configuration and status report |
| RS-232 Terminal | Command Line Interface (CLI) for configuration and status report |
| Management | RAIDWatch manager software for all major platforms via Ethernet port |
| Event Notification | Email, fax, LAN broadcast, SNMP traps, MSN messenger and SMS short messages |
| Operating Systems | |
| Supported OS | OS independent |
| RAID | |
| RAID Level | 0, 1 (0+1), 3, 5, 6, 10, 30, 50, 60, JBOD |
| RAID Features | Multiple arrays configurable with dedicated or global hot spares |
| Online expansion | Adding new drives, copying and replacing drives with drives of larger capacity, automatic background rebuilds, independent array stripe size and write policy |
| Environment Specification | |
| Humidity | 10%~80%, non-condensing |
| Operating Temperature | 0°C~40°C |
| Dimension and Weight | |
| Physical Dimensions/mm (Width x Height x Depth) | 482 x 174.4 x 514 (with handles), 4U RM |
| Weight (without drives) | 36.5kg |
| Gross weight (without drives) | 39.6kg |
| Service | |
| Warranty | 3 years |
| Service | optional |