Deutsch English

-> Products » RAID-Systems » RAIDdeluxe RAID-Systems » RDL-CS16I10D-R3

RAIDdeluxe RDL-CS16I10D-R3

RAIDdeluxe RDL-CS16I10D-R3
RAIDdeluxe RDL-CS16I10D-R3

16-Bay x 3.5 LFF
iSCSI-to-SAS RAID-Systems


The RDL-CS16 (single controller) RAID Subsystem features enormous host performance to increase system efficiency and performance.

The new system comes with Dual Core RAID-on-Chip (ROC) Areca RAID-Controller. It features 16 hot-swappable 3.5 LFF 10 Gbps iSCSI to 12 Gbps SAS / 6 Gbps SATA hard disk / SSD drive bays in a 19-inch 3 U rackmount unit.

RAIDdeluxe is designed to grow with future requirements. To this end, RAIDdeluxe uses only common modules and the RAIDdeluxe enclosure is designed for maximum expandability and flexibility.

By connecting one or more RAIDdeluxe JBODs to the subsystem, additional hot-swappable SAS / SATA hard disk / SSD drives are possible per JBOD – up to a total of 512 devices.

With RAIDdeluxe, the power supply is directly cooled for better airflow. This eliminates pockets of dead air to prevent overheating of the subsystem.

RAIDdeluxe incorporates a cableless design which means fewer connectors are used. Fewer connectors result in better signal stability. In addition, RAIDdeluxe uses high-quality connectors for maximum signal integrity.



Technical Specifications

Model RAIDdeluxe RDL-CS16I10D-R3
Host Interface 2 x 10 Gbps iSCSI, SFP+
External Connector Type SFP
JBOD Expansion Yes
Controller Single (Areca iSCSI-to-SAS)
Controller CPU Dual Core RAID-on-Chip (ROC) 1.2 GHz
Controller Flash-Image Redundant
Cache Memory 2 ~ 8 GB DDR3-1866 ECC SDRAM, 2 GB installed per controller
Battery Backup Optional
Disk Interface 12 Gbps / 6 Gbps SAS, 6 Gbps / 3 Gbps SATA
Disk Channel 16
Harddisk Drives / SSDs Up to 16 x 3.5 LFF/2.5 SFF SAS / SATA, hot swappable (expandable with JBODs up to 512 HDDs)
Power Supply 2, max. 595 W continuous
Input Voltage 100 V ~ 240 V, 50 Hz ~ 60 Hz
RAID Functions
RAID Level 0, 1, 3, 5, 6, 10, 30, 50, 60 and JBOD
RAID Features Online Array roaming, RAID level/stripe size migration, capacity expansion and RAID level migration simultaneously, Volume Set Expansion, multiple array enclosures per host connection
Data Rebuild after Drive Failure Automatical Data Regeneration
Host Requirements Host independent
Operating Systems
Supported OS OS independent
Management Application
Front Panel LCD and Buttons Yes
RS-232 Terminal COM1 serial port for local access to firmware-embedded utility
GUI Browser-based or manager software via LAN
Event Notification email, SNMP
Environment Specification
Rel. Humidity 10 % ~ 80 %, non condensing
Operating Temperature 0 °C ~ 40 °C (32 °F ~ 104 °F)
Dimensions and Weight
Physical Dimensions/mm (Width x Height x Depth) 445 x 132.6 x 506 (3 U)
Weight (without drives) 31 kg / 32 kg
Warranty 3 years
Service Optional